The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.

Victron Energy Battery Smart Protect Monitor 12V 24V 220A 65 100 220

(No reviews yet) Write a Review
Usually ships in 24 hours
Calculated at Checkout

Victron Energy - Battery Protect 12V 24V 220 Amp (BP-220)

BatteryProtect is designed to prevent battery damage by disconnecting it from non required loads or it has insufficient power left to start the engine.


VE Battery protect features:

Auto-ranging - Automatic voltage detection. Suitable for 12V and 24V systems

Easy programming - It can be set to operate or disconnect at several different voltages. The integrated display will display the setting selected.

Overvoltage protection - disconnects the load when 16V / 32V lead is reached to prevent damage

Delayed alarm output - Output alarm is activated when voltage drops below voltage set for more than 12 seconds, so it will not activate alarm during engine starts.

Delayed load disconnect / reconnect - Load disconnects after 90 seconds after an alarm.  The load will be reconnected after 30 seconds, once the set voltage is reached. 



Alarm output delay - 12 Seconds

Load reconnect delay - 30 seconds

Load disconnect delay - 90 seconds

Peak Current - 600A

Maximum Continuous load current - 200A

Consumption (ON / OFF) - 1.5mA / 0.6mA

Connection - M8

Dimensions - 62mm x 123mm x 120mm (H x W x D)

Weight - 0.8Kg

Warranty - 5 Years