Core Features & Benefits
Webasto Air Top Evo 24V Replacement Glow Pin - 1314151A /
1314151
The genuine Webasto Air Top Evo 24V replacement glow pin is designed for compatible Webasto Air Top Evo 3900, Evo 5500, Evo 40, and Evo 55 air heaters. This replacement glow plug, part number 1314151A, is an original Webasto component used during the heater's ignition process.
The glow pin helps ignite the fuel-air mixture during heater startup. A faulty glow pin can contribute to ignition failures, unsuccessful startup attempts, and heater fault codes. Replacing a defective glow pin with the correct genuine Webasto spare part helps restore proper ignition operation.
Key Features
- Genuine Webasto replacement glow pin / glow plug
- Designed for compatible 24V Webasto Air Top Evo air heaters
- Supports the heater's ignition and startup process
- Direct replacement for the correct original Webasto glow pin
- Compatible with Air Top Evo 3900, 5500, 40, and 55 models listed below
- Suitable for heater maintenance and repair
Compatible Webasto Heaters
This 24V Webasto glow pin is suitable for the following heater models:
- Webasto Air Top Evo 3900 24V
- Webasto Air Top Evo 5500 24V
- Webasto Air Top Evo 40 24V
- Webasto Air Top Evo 55 24V
Important: Check your heater's model, operating voltage, and original glow pin part number before ordering. Similar Webasto heater models may use different replacement components.
Product Details
- Brand: Webasto
- Product type: Replacement glow pin / glow plug
- Part number: 1314151A / 1314151
- Alternative part number format: 1314151
- Operating voltage: 24V
- Heater family: Webasto Air Top Evo
- Application: Heater ignition system
When Should You Replace a Webasto Glow Pin?
A worn or defective glow pin may prevent a Webasto Air Top Evo heater from igniting correctly. Common symptoms that may indicate a glow pin problem include:
- Heater fails to ignite during startup
- Repeated unsuccessful ignition attempts
- Heater shuts down after attempting to start
- Diagnostic fault codes indicating a glow pin or ignition circuit problem
These symptoms can also result from fuel supply, electrical, combustion air, or other heater faults. Confirm the cause using the appropriate Webasto troubleshooting instructions before replacing the glow pin.
Installation and Replacement Note
Glow pin replacement should be performed according to the official Webasto service instructions by a qualified technician. The heater must be switched off, allowed to cool, and serviced using the correct procedures and tools.
No reviews have been added for this product.








