The newest generation Eberspacher Hydronic D4E was designed for efficiency and durability on the road. Bundled with the EasyStart Pro or Heatso digital controller, this kit will keep your cabin warm in any weather.
ESPAR HYDRONIC S3 D4E WATER HEATER KIT
KEY FEATURES OF THE ESPAR HYDRONIC D4E RV 12V HEATER
An upgraded brushless fan for quieter performance and extended lifespan.
Stepless heating control and integrated temperature sensor for automatic mode.
Dynamic fan speed is adjusted according to the temperature set.
Optimized noise reduction and NVH for improved comfort.
An upgraded brushless fan for quieter performance and extended lifespan.
Stepless heating control and integrated temperature sensor for automatic mode.
Dynamic fan speed is adjusted according to the temperature set.
Optimized noise reduction and NVH for improved comfort.
THE REVOLUTIONARY ESPAR HYDRONIC S3 D4E
This diesel water heater uses cutting-edge technologies to provide a 14,665 BTU output while staying fuel efficient. The D4E is capable of reaching a record altitude of 3,000 meters (9,900 feet) when combined with the EasyStart Pro controller.
This heater operates significantly quieter thanks to the brushless fan and upgraded pump. As a result of the internal upgrades, the lifecycle is also increased to 5,000 hours.
CENTRAL HEATING IN YOUR VAN OR RV
Once activated, the Espar D4E heater will use the vehicle’s own fuel in a combustion process to heat the coolant via a heat exchanger inside the Hydronic Unit.
One way to save both power and fuel is using residual heating with a switched-off engine. This feature allows the system to run for as long as the coolant temperature does not drop below the threshold set by the user.
The Espar air and water heater is self-regulating and operates in a similar way to a domestic central heating system.
COMPLETE WATER SYSTEM CUSTOM-BUILT FOR YOU
The shipped kit provides a complete domestic water heating system that can be used for showers and taps. In addition, the universal kit can be used to preheat the engine, as well as heat air and floors.
If you require extra features, custom kits can be built on demand.
- Espar Hydronic S3 D4E Diesel 12V Heater
- EasyStart PRO controller
- Kalori Blower controller unit
- Water Pump for coolant
- Fuel Pump
- Heater water (expansion) tank 5 Liter
- Pre-assembled 24 plate Water heat exchanger with mixing valve
- Espar / Kalori Blower box 4.3KW with Grill
- All electrical harnesses and connections
- All necessary clips and screws
- 1m exhaust pipe
- 1m combustion Intake pipe
- 2.3m water hose (Heater) (20mm)
- 4m water hose 16mm ID (Blower Box)
- Exhaust Silencer (24mm)
- Hydronic Mounting Bracket
Technical Specifications of the Espar / Eberspacher Hydronic D4E 12V Diesel RV Kit - 4.3KW- CS Version
- Fuel:
- Diesel
- Voltage:
- 12V
- Heating Output:
- 1.8 - 4.3KW (6,150 - 14,600BTU)
- Maximum Altitude:
- 3000m (9,900ft)
- Service Life:
- 5,000 hours
- Fuel Consumption:
- 0.57 l/h (0.15 gal/h)
- Energy Consumption:
- 24W
- Dimensions (L x W x H):
- 215 x 91 x 144mm (8.4 x 3.5 x 5.6in)
- Weight:
- 2kg (4.4lbs)
- Kalori EVO 1 Heat Exchanger - Heating Power:
- ~4.3 kW
- Heat Exchanger - Power Consumption:
- 70 W
- Heat Exchanger - Weight:
- 2.2 kg
- Heat Exchanger - Dimensions (LxWxH):
- 255 x 125.5 x 114 mm
- Water Expansion Tank - Weight:
- 0.9 kg
- Water Expansion Tank - Dimensions (LxWxH):
- 100 x 220 x 300 mm
- Heater model:
- Hydronic 4
- Power output:
- 4kW
Included in the kit:
ESPAR HYDRONIC S3 D4E WATER HEATER KIT
The newest generation Eberspacher Hydronic D4E was designed for efficiency and durability on the road. Bundled with the EasyStart Pro or Heatso digital controller, this kit will keep your cabin warm in any weather.
KEY FEATURES OF THE ESPAR HYDRONIC D4E RV 12V HEATER
An upgraded brushless fan for quieter performance and extended lifespan.
Stepless heating control and integrated temperature sensor for automatic mode.
Dynamic fan speed is adjusted according to the temperature set.
Optimized noise reduction and NVH for improved comfort.
An upgraded brushless fan for quieter performance and extended lifespan.
Stepless heating control and integrated temperature sensor for automatic mode.
Dynamic fan speed is adjusted according to the temperature set.
Optimized noise reduction and NVH for improved comfort.
THE REVOLUTIONARY ESPAR HYDRONIC S3 D4E
This diesel water heater uses cutting-edge technologies to provide a 14,665 BTU output while staying fuel efficient. The D4E is capable of reaching a record altitude of 3,000 meters (9,900 feet) when combined with the EasyStart Pro controller.
This heater operates significantly quieter thanks to the brushless fan and upgraded pump. As a result of the internal upgrades, the lifecycle is also increased to 5,000 hours.
CENTRAL HEATING IN YOUR VAN OR RV
Once activated, the Espar D4E heater will use the vehicle’s own fuel in a combustion process to heat the coolant via a heat exchanger inside the Hydronic Unit.
One way to save both power and fuel is using residual heating with a switched-off engine. This feature allows the system to run for as long as the coolant temperature does not drop below the threshold set by the user.
The Espar air and water heater is self-regulating and operates in a similar way to a domestic central heating system.
COMPLETE WATER SYSTEM CUSTOM-BUILT FOR YOU
The shipped kit provides a complete domestic water heating system that can be used for showers and taps. In addition, the universal kit can be used to preheat the engine, as well as heat air and floors.
If you require extra features, custom kits can be built on demand.
- Espar Hydronic S3 D4E Diesel 12V Heater
- EasyStart PRO controller
- Kalori Blower controller unit
- Water Pump for coolant
- Fuel Pump
- Heater water (expansion) tank 5 Liter
- Pre-assembled 24 plate Water heat exchanger with mixing valve
- Espar / Kalori Blower box 4.3KW with Grill
- All electrical harnesses and connections
- All necessary clips and screws
- 1m exhaust pipe
- 1m combustion Intake pipe
- 2.3m water hose (Heater) (20mm)
- 4m water hose 16mm ID (Blower Box)
- Exhaust Silencer (24mm)
- Hydronic Mounting Bracket
Choosing Guide
Option Choosing Guide for this product is coming soon, please contact support@heatso.com if you need help picking the right options or have any questions.
Shipping
- United States - 1-5 Working Days
- United Kingdom - 2-5 Working Days
- European Union - 2-7 Working Days
- Australia / New Zealand - 5-14 Working Days
- Rest of World - 5-14 Working Days
There may be a delay if the order is shipped to a PO or parcel shop address. Please note, some couriers do not offer shipping to PO boxes.
View full shipping & Delivery information
Returns
You can return or exchange goods within 14 days from the date of purchase if the item is unused and brand new in unopened packaging. You must contact us before returning any goods, though.
Warranty Information
Most heaters come with 2 year warranty + optional 1 year extended Warranty available
- Parts - 1 Year Warranty
- Refrigerators - 1 Year Warranty
- AC Systems - 1 Year Warranty
- Heavy duty heating equipment (10 kW+) - 1 Year Warranty
- Other items - 1 Year Warranty
Installation, servicing and maintenance must be done in accordance with manufacturers guidelines. Failure to follow these guidelines will result in voiding your warranty.
We provide free technical and installation support via email or phone to all of our customers who purchase a heater, heater kit or other products from Heatso. We take pride in our customer service and want to ensure that your heater system is properly installed. As a result, if you have any difficulties, please do not hesitate to contact us.
If you require removing and/or refitting your item, please visit a local professional or authorized specialist, if you can not find one you can contact us and we will try to recommend a local partner to assist with the task. The cost of removing and/or refitting this item is not covered by the warranty.
Customer reviews
Write a Review
Espar / Eberspacher Hydronic D4E 12V Diesel RV Kit - 4.3KW- CS Version
-
Thank you
I will take credit for this kit. Thank you heatso team for composing 14k BTU for me. I think more people will be interested in 14k instead of 17k