Floor Mounting Bracket For Air Heaters

Excellent order process, rapid delivery, easy to install.

I was a little hot when I learned this was shipping from the UK. Not clearly noted in the website.
But after I received it in three days all was very forgiven. And I live in Las Vegas, Nevada, USA!

I installed my espar d2 unit 3 times before I was satisfied with the results. The first two times were using the external mounting box from Heatso (I reviewed that product), and, ultimately, used this for my final install.

Quite happy with this bracket as it provides a clean and simple install. You need to drill a 5in hole, which was easily accomplished with an appropriately sized bit. I cleaned up the exposed edges and put down a few coats of rust inhibitor. The bracket was the perfect depth for my 2019 sprinter floor after vinyl planks, 1/2in ply and a 1/4in minicell foam layer. Connecting the exhaust, combustion hose and fuel line is a bit tricky given the small space, but there is ample room for the brackets if you pay attention to their orientation. I used a socket wrench with adaptor for the bits and it all fit just fine.

Would highly recommend this product if you're installing the D2 anywhere in your van conversion. Drilling a 5in hole seemed intimidating upfront, but easier than having to align 7 smaller holes for the simple espar floor bracket. Not to mention applying rust inhibitor is much easier for the larger opening.

Save yourself some time and buy the bracket and bit and be done with it.

This site does not really provide a great explanation of what this part is needed for, but if you are mounting the heater on the floor, this part is a must!