Webasto Air Top Pro 25 Gasoline 12V Heater Kit with Controller

Quiet Gasoline 12V Air Heater for Camper Vans and Light-Duty Vehicles

The Webasto Air Top Pro 25 Gasoline 12V Heater Kit with Controller brings efficient parked-vehicle heating to compatible gasoline-powered vans, RVs and work vehicles. Stepless heating from 2,730–7,000 BTU/h (0.8–2.0 kW) helps maintain cabin comfort, while 8,500 BTU/h (2.5 kW) boost mode provides extra heat when the vehicle is cold. Select the Light-Medium Duty Kit with Rheostat Controller (5014436A) or the Webasto MultiControl Kit (5014495A).

Benefits & Everyday Use

• Designed for gasoline vehicles: A vehicle-fuel-based heating solution for compatible 12V applications.
• Efficient temperature control: Modulates heat continuously from 0.8 to 2.0 kW instead of using only on/off heating.
• Quick warm-up: 8,500 BTU/h (2.5 kW) boost for up to 6 hours.
• Quiet comfort: Redesigned air fan and brushless EC drive help minimize noise in eco operation.
• Heating at elevation: Automatic altitude adjustment for mountain travel within the stated operating range.
• Two factory configurations: Choose simple Rheostat control for light-to-medium-duty use or a MultiControl kit with digital display and scheduling.
• RVIA standards-compliant for RV and camper van applications, making it a practical heating solution for gasoline-powered camper vans, Class B motorhomes, and RV conversions.

Who Is This Heater Best For?

The gasoline 12V configuration is intended for customers who use a gasoline-powered vehicle and want a compact, engine-off cabin heating system. Match the heater to your vehicle voltage, fuel system and the intended mounting location; gasoline fuel grade requirements should be confirmed against the latest Webasto North American documentation.

• Gasoline camper vans and van conversions: Quiet heat for weekend camping, overnight stops and winter travel.
• Gasoline Class B RVs and compact recreational vehicles: Comfort when parked without relying on engine idle time.
• Light- and medium-duty gasoline work vehicles: Cabin heating for service, utility and vocational use.
• Gasoline-powered overland vehicles: Automatic altitude adjustment for high-elevation trips.
• Specialty and mobile-service vehicles: Heating for operators or crews in suitable installed enclosures.
• Marine installations where approved: Webasto lists marine among its application markets; confirm configuration and marine-specific installation requirements.

Technical Specifications

• Fuel: Gasoline.
• Rated Voltage: 12V DC.
• Continuous Heat Output: 2,730–7,000 BTU/h (0.8–2.0 kW).
• Fuel Consumption: 98–350 mL/h.
• Electrical Power Consumption: Maximum 20 W (heater specification).
• Boost Mode: 8,500 BTU/h (2.5 kW), for up to 6 hours.
• Ambient Operating Temperature: -40°F to 104°F (-40°C to 40°C).
• Altitude Capability: Automatic adjustment; operation up to approximately 18,045 ft (5,500 m), with maximum heating output available up to approximately 9,843 ft (3,000 m).
• Heater Dimensions (L × W × H): 12.6 × 5.0 × 4.9 in (321 × 127 × 124 mm).
• Heater Weight: 6.5 lb (2.95 kg); this is not the packaged kit or shipping weight.
• RV Compliance: RVIA standards compliant for RV and camper van applications.
• Mounting: Can be installed inside the vehicle or externally on the chassis, subject to Webasto installation requirements.
• Mechanical Interface: Retains the Air Top 2000 STC footplate and air inlet/outlet diameters; overall heater dimensions differ.
• Electrical Interface: Heater-side 500 mm wiring harness with an 8-pin connector and a separate 1,000 mm dosing-pump cable, or the manufacturer-specified integrated harness arrangement.
• Communications: W-Bus, LIN and CI-Bus; CAN J1939 implementation is identified by Webasto as forthcoming.
• Conformity: ECE R10, ECE R122 and CE; designed with cybersecurity requirements according to ISO/SAE 21434.

Kit Includes

• Air Top Pro 25
• Rheostat Controller or MultiControl
• Wire Harness ATP25 Rheostat
• Tube Flex AA 22mm x 0.5M
• Wiring Harness Extension 2M DP42 ATP25
• Standpipe 4.76 x 828mm 0.25" NPT
• Tube Flex SS 22mm x 1M with End Cap
• Tube Flex Pak 60mm x 1M
• Bag Install Hardware AT 2000 ST STC
• Bag Parts Intake Exhaust AT2000
• Bag Parts Fuel System Evaporative Heater
• Kit Mounting Plate Air Top SeriesBag Fuel Pump DP42 ATP25

Browse Webasto Manuals & Technical Documentation

Choose Your Gasoline 12V Factory Kit

Webasto Air Top Pro 25 vs. Air Top 2000 STC

Compared with the previous-generation Air Top 2000 STC, the Air Top Pro 25 expands the low-output operating range, adds a 2.5 kW boost mode and introduces automatic altitude adjustment. The specifications below compare the same fuel and voltage category, not every kit component.

Air Top 2000 STC Replacement Part Numbers

Webasto identifies 5014436A as the replacement kit for Air Top 2000 STC gasoline 12V Light-Medium Duty P/N 5012558B. Use the cross-reference below to identify the appropriate new-generation family.

FAQs

Will my Webasto heater still keep me warm at high altitudes?

Yes. The Air Top Pro 25 automatically adjusts for altitude and is specified to operate up to approximately 18,045 ft (5,500 m). Webasto states that maximum heating output is available up to approximately 9,843 ft (3,000 m). Above that elevation, the heater can continue operating within its stated range, but peak heat output may be reduced. Actual cabin comfort also depends on outside temperature, insulation and installation.

Can I replace my Webasto Air Top 2000 STC with the new Air Top Pro 25 without modifying my setup?

Not necessarily. Webasto retains the Air Top 2000 STC footplate and air inlet/outlet diameters, which helps with replacement installations. However, the heater body is not exactly the same size: the Air Top Pro 25 measures 321 × 127 × 124 mm, compared with 311 × 120 × 121 mm for the Air Top 2000 STC. The electrical connector, wiring harness arrangement and control interfaces also differ. Plan to check physical clearance, wiring and controller compatibility; do not assume a plug-and-play swap or reuse of every existing component. Follow Webasto installation instructions or consult a qualified installer.

Is the Webasto Air Top Pro 25 RVIA compliant?

Yes. The Webasto Air Top Pro 25 meets RVIA standards for RV and camper van applications. It is designed for use in recreational vehicles, camper vans, and other compatible mobile heating installations. Always follow Webasto's installation instructions and applicable vehicle requirements.

Can I install this heater in a gasoline camper van?

Yes, provided the van has a compatible 12V system, an approved gasoline fuel supply and sufficient space for a Webasto-compliant installation. Verify the exact fuel grade and required combustion-air, exhaust and duct routing before fitting it.

How is the gasoline version different from the diesel version?

The gasoline 12V model uses gasoline rather than diesel and has a 0.8 kW minimum continuous heat output (versus 0.7 kW for diesel). Both versions reach 2.5 kW in boost mode, but fuel and electrical-system compatibility must match the vehicle.

Does the kit include all ducting and accessories?

Webasto lists distinct Light-Medium Duty and MultiControl factory configurations, but the supplied launch materials do not itemize every component in the new boxes. Confirm the selected kit's contents with Heatso before ordering any additional installation parts.